Dual-ActionPrimer + Membrane
A dual-action, high-performance elastomeric liquid membrane engineered for deep substrate penetration and tough, durable waterproofing — acting as a penetrating primer when diluted and a robust rubber-like membrane when applied undiluted.
Inclusive of all taxes · Available via authorized dealers only
Demo pricing shown — to be updated with final rates
Available only through authorized dealers & company representatives — not sold online.
Deeply penetrates concrete capillaries and micropores, sealing the substrate from within.
Acts as a penetrating primer when diluted, and a durable elastomeric membrane when applied undiluted.
Bridges hairline cracks and accommodates normal structural movement.
Forms a continuous, joint-free membrane that minimizes leakage paths.
Bonds strongly to concrete and other cementitious surfaces with long-term weather resistance.
Diluted 1:2 — Primer Coat: Penetrates deep into capillaries and micropores, sealing the substrate from within.
Diluted 1:1 — Waterproofing Coat: Forms a seamless, flexible waterproofing membrane over roofs and general surfaces.
Undiluted — Membrane Coats: Builds a thick, fibre-reinforced elastomeric membrane for basements and water tanks under high pressure.
Clean thoroughly to remove dust, salts, loose particles, grease and oil. Ensure the substrate is clean, dry and structurally sound.
Stir Brown Coat LM thoroughly until a uniform consistency is achieved before application.
Apply the first coat diluted with water in a 1:2 ratio for deep substrate penetration and strong adhesion. Dry for 2 hours.
For roofs & general surfaces, apply the second coat diluted 1:1 to form a seamless, flexible waterproofing membrane.
For high-pressure areas, apply 2 undiluted coats with 24-hour drying between coats to build a thick, fibre-reinforced membrane.
After full curing, apply Protecto (Protective Coating) as the final UV-resistant top coat for long-lasting protection.
| Features | Brown Coat LM | Conventional |
|---|---|---|
| Dual-Action (Primer + Membrane) | ||
| Deep Substrate Penetration | ||
| Crack-Bridging Flexibility | ||
| Seamless / Joint-Free Membrane | ||
| Single Product, Two Uses |
Used the diluted version as a primer on our basement wall, then two undiluted coats. Very versatile — one product, two jobs.
Applied on an old terrace with hairline cracks. It bridged them well and the roof has stayed dry through the monsoon.
Our contractor liked that it works as both primer and topcoat — saved buying two separate products.
When diluted with water it acts as a penetrating primer that seals concrete capillaries from within; when applied undiluted it cures into a thick, rubber-like waterproofing membrane.
It's suitable for roofs, terraces, basements, foundations, water tanks, and other cementitious structures.
Typically a diluted primer coat, followed by two undiluted membrane coats with a 24-hour drying interval between them.
Yes, its high flexibility allows it to bridge hairline cracks and accommodate normal structural movement.
A premium rubber-based waterproof coating that permanently eliminates efflorescence (Shora / white salt deposits) by forming a seamless, flexible barrier that blocks the movement of soluble salts within masonry.
Inclusive of all taxes · Available via authorized dealers only
Demo pricing shown — to be updated with final rates
Available only through authorized dealers & company representatives — not sold online.
Forms a flexible waterproof membrane that blocks moisture and salt migration.
Prevents the upward movement of water and dissolved salts through masonry.
Creates a durable, non-peeling barrier that locks salts within the substrate.
Simple brush or roller application for quick and hassle-free installation.
Prevents efflorescence, peeling, blistering, and white salt stains on painted surfaces.
Pre-Construction: Fill brick joints with mortar, apply Silane Spray, then 2 cross coats of Shora Shield.
Post-Construction (Renovation): Remove damaged plaster, apply Silane Spray, then 2 cross coats of Shora Shield.
Clean the surface thoroughly to remove dust, salts, loose particles, grease, oil, and other contaminants. Ensure the substrate is clean, dry, and structurally sound before application.
Stir Shora Shield thoroughly until a uniform consistency is achieved before application.
Before applying Shora Shield, fill all brick joints and gaps with cement mortar to obtain a uniform and sound surface. Once the mortar has cured, apply Silane Spray uniformly over the surface. Then apply two cross coats of Shora Shield using a brush or roller, ensuring complete and uniform coverage. After the second coat, allow it to cure for a minimum of 24 hours (or until the next day). Then apply one coat of cement-sand mortar using a paint roller to create a textured surface for better plaster adhesion.
After removing the damaged plaster and preparing the surface, apply Silane Spray uniformly over the exposed masonry. Allow the Silane to penetrate and dry as recommended. Then apply two cross coats of Shora Shield using a brush or roller to form a continuous waterproof barrier. After the second coat, allow it to cure for a minimum of 24 hours (or until the next day). Then apply one coat of cement-sand mortar using a paint roller to create a textured surface for better plaster adhesion.
Allow a minimum drying time of 24 hours between coats.
Do not expose the freshly coated surface to rain, water, or excessive moisture for at least 24 hours after the final application. Ensure the coating has completely cured before carrying out any further finishing work.
| Features | Shora Shield | Conventional |
|---|---|---|
| Stops Efflorescence at Source | ||
| Flexible / Non-Peeling | ||
| Blocks Capillary Action | ||
| Single-Step Application | ||
| 10-Year Warranty |
Our compound wall had persistent white salt patches every monsoon. After coating with Shora Shield, we haven't seen it return.
Applied it before plastering on a new construction. Simple brush application and the walls have stayed clean since.
Recommended by our mason for an old house with recurring efflorescence near the plinth. Been over 8 months, no reappearance.
Efflorescence occurs when moisture carries dissolved salts to the wall surface. Shora Shield forms an elastic waterproof membrane that permanently isolates these salts, blocking their migration to the surface.
Unlike treatments that only hide surface salt stains, Shora Shield addresses the root cause by creating a seamless barrier that blocks moisture and salt movement within the masonry.
Shora Shield is best applied on the masonry surface before final plastering and painting. For existing walls, remove loose or damaged paint/plaster first for proper adhesion.
Two coats are recommended with a 24-hour drying interval between coats using a brush or roller.
Innovative construction chemicals
engineered for lasting protection
trusted by builders, valued by homes.
Subscribe to our Newsletter to be updated. We promise not to spam.
© 2026 WeeShield. All rights reserved.