DIN 1048 (P-5): 1991Test Certification
An advanced penetrating wood protection treatment engineered to provide long-lasting moisture resistance for commercial plywood and engineered wood panels, forming an invisible hydrophobic barrier without blocking natural breathability.
Inclusive of all taxes · Available via authorized dealers only
Demo pricing shown — to be updated with final rates
Available only through authorized dealers & company representatives — not sold online.
Penetrates deep into wood fibres for long-lasting protection without forming a surface film.
Forms an invisible water-repellent barrier that reduces moisture absorption and dampness.
Helps minimize swelling, warping, and delamination to maintain wood stability.
Tested for water resistance as per DIN 1048 (P-5): 1991 standard.
Suitable for pre-treatment before lamination, veneering, polishing, or painting.
Commercial & Non-Laminated Plywood: Deep-penetrating pre-treatment before lamination.
Block Boards: Pre-treatment for long-lasting moisture resistance.
MDF, HDF & Particle Boards: Protects against swelling and moisture damage.
Veneers & Engineered Wood Panels: Compatible with laminates, veneers, paints, and finishes.
Stir Marine Shield thoroughly before application and intermittently during use to ensure a uniform consistency.
Apply a liberal, even coat using a brush, roller, or low-pressure spray, following the direction of the wood grain for complete coverage.
Allow the product to penetrate deep into the surface before recoating.
Reapply a second coat to ensure maximum penetration and long-lasting protection.
| Features | Marine Shield | Conventional |
|---|---|---|
| Deep Fibre Penetration | ||
| Maintains Natural Breathability | ||
| Anti-Swelling / Anti-Warping | ||
| DIN 1048 Tested | ||
| Compatible with Laminates & Paints |
Treated all our kitchen plywood panels before assembly. No swelling near the sink area even after months of daily use.
Our carpenter applies it as standard practice before laminating boards now — good protection without changing how the wood looks.
Used on MDF panels for a bathroom cabinet. Held up well against the humidity so far.
No. It penetrates deep into the wood fibres to form an invisible hydrophobic barrier without forming a surface film, so the substrate can still breathe.
It's designed to be applied before furniture manufacturing or installation, treating the plywood or panel ahead of fabrication.
Yes — Marine Shield is finish-compatible and suitable for pre-treatment before lamination, veneering, polishing, or painting.
Yes, it's laboratory tested for water resistance as per the DIN 1048 (P-5): 1991 standard.
Innovative construction chemicals
engineered for lasting protection
trusted by builders, valued by homes.
Subscribe to our Newsletter to be updated. We promise not to spam.
© 2026 WeeShield. All rights reserved.