RustConvertor
An advanced rust-converting treatment that transforms existing rust into a tough, adherent black protective layer and prepares iron & steel surfaces for long-term corrosion protection — stabilizing the rust layer instead of trying to remove it.
Inclusive of all taxes · Free shipping on prepaid orders
Demo pricing shown — to be updated with final rates
TO BE ADDED
FINISH STOPS CORROSION
How To Use (in 4 easy steps)
Prepare Surface
Remove loose rust, scale, dirt, grease and oil. Wire-brush or sand as needed.
Clean & Dry
Ensure the metal surface is clean and reasonably dry before application.
Apply Converter
Apply evenly by brush, roller or spray. Allow it to react until dark/black.
Protect with Topcoat
Once cured, apply a compatible primer or protective topcoat.
Visible Results
At A Glance
- Black Protective FinishDark, Adherent Coating
- 1–2 CoatsDepending on Rust Condition
- 20–60 Min DryingTypical Surface Drying Time
- Indoor/Outdoor UseVersatile Application
Powerful Benefits
Where To Apply
TO BE ADDED
What Customers Say
Converted rust on our old gate into a solid black finish, ready for paint.
Used it on structural steel at our site — strong adhesion, no flaking.
Simple to apply and stopped the corrosion from spreading further.
Frequently Asked Questions
Remove loose rust, scale, dirt, grease and oil before application — the converter stabilizes the remaining rust layer.
Typically 20–60 minutes for surface drying, depending on conditions and rust severity.
Yes, once fully cured, it provides a primer-compatible surface for a protective topcoat.
Yes, it's suitable for both indoor and outdoor applications on rusted iron and steel.
Typically 1–2 coats, depending on the severity of the rust condition.
Convert Rust. Protect Steel.
Long-term corrosion protection, delivered to your door.
Shop NowDraft for client review — product photography to be added, pricing to be confirmed before publishing.
