IS 13630 (P-S) 2019Test Certification
A single-component acrylic silane waterproofing coating engineered for areas exposed to continuous water — forming a tough, seamless, joint-free membrane that permanently prevents seepage in bathrooms, sunken slabs, and pools.
Inclusive of all taxes · Available via authorized dealers only
Demo pricing shown — to be updated with final rates
Available only through authorized dealers & company representatives — not sold online.
Ready-to-use; no mixing required for consistent performance.
Withstands standing water pressure in bathrooms, sunken slabs, and pools.
Bonds strongly to concrete and provides an ideal base for tile adhesives.
Accommodates minor structural movement and bridges hairline cracks without cracking.
Forms a continuous, joint-free barrier to prevent leakage.
Bathrooms & Toilets: Floors and walls up to shower-head height.
Sunken Slabs: Depressed slab areas, treated before filling.
Swimming Pools: Primary waterproofing layer beneath tiles.
Clean thoroughly to remove dust, salts, loose particles, grease and oil. Ensure the substrate is clean, dry and structurally sound.
Stir Bathroom Shield thoroughly until a uniform consistency is achieved before application.
Fill all brick joints and gaps with cement mortar to obtain a uniform, sound surface.
Once the mortar has cured, apply two cross coats using a brush or roller for a continuous, pinhole-free membrane.
After the second coat cures for a minimum of 24 hours, apply one coat of cement-sand mortar with a paint roller for a plaster-ready textured surface.
| Features | Bathroom Shield | Conventional |
|---|---|---|
| Single-Component / No Mixing | ||
| High Hydrostatic Resistance | ||
| Crack-Bridging Flexibility | ||
| Seamless / Joint-Free Membrane | ||
| IS 13630 Tested |
Used it for our bathroom floor and sunken slab before tiling. No seepage to the room below even after a year.
No mixing hassle, just brush it on. Our contractor was happy with how easy it was compared to older waterproofing systems.
Applied on our terrace utility area which used to leak into the flat below. Problem solved after two coats.
It's engineered for continuous water-exposure zones — bathrooms, toilets, sunken slabs, balconies, utility areas, and swimming pools.
No. It's a single-component, ready-to-use formulation, eliminating mixing errors common with multi-part waterproofing systems.
It's formulated to be flexible and crack-bridging, accommodating minor structural movement and hairline cracks without failing.
Yes — it bonds strongly to concrete and provides a suitable base for tile adhesives once fully cured.
Yes, it carries test certification as per IS 13630 (P-S) 2019 and comes with a 10-year warranty.
Innovative construction chemicals
engineered for lasting protection
trusted by builders, valued by homes.
Subscribe to our Newsletter to be updated. We promise not to spam.
© 2026 WeeShield. All rights reserved.