Deep-PenetratingSalt Dissolution Technology
A high-performance, professional-grade surface treatment engineered to remove efflorescence (water-soluble salt deposits) from masonry and cementitious substrates, restoring natural appearance while preparing the surface for protective treatments.
Inclusive of all taxes · Available via authorized dealers only
Demo pricing shown — to be updated with final rates
Available only through authorized dealers & company representatives — not sold online.
Penetrates surface pores to dissolve and remove embedded soluble salt deposits.
Quickly eliminates white salt stains from brick, stone, concrete and plaster.
Revives the original colour and texture without leaving visible residue.
Safe for properly cured masonry, concrete, natural stone and cement-based substrates.
Low-viscosity liquid enables fast and uniform surface coverage.
Natural Stone: Sandstone, limestone, basalt, granite, laterite, etc.
Brick & Concrete Surfaces: Walls, façades, and exposed architectural concrete.
Heritage & Restored Structures: Restoration-grade treatment for sensitive surfaces.
Apply Efflorescence Remover directly onto the affected area using a brush, roller, or low-pressure sprayer.
Leave the product for 2–3 minutes to dissolve the efflorescence (white salt deposits).
Scrub gently with a stiff nylon brush or scrubber to lift loosened salt deposits.
Rinse thoroughly with clean water to remove dissolved salts and residue.
For heavy or stubborn deposits, repeat the application after the surface has dried.
| Features | Efflorescence Remover | Conventional |
|---|---|---|
| Deep-Penetrating Salt Dissolution | ||
| Fast-Acting (2–3 Minutes) | ||
| Non-Corrosive on Mineral Surfaces | ||
| Restores Natural Appearance | ||
| Restoration-Grade Formulation |
Our compound wall had years of white salt buildup. This cleared it up in one weekend of work, brick colour looks original again.
Used it on an old plastered wall before repainting. Reacted quickly and rinsed off clean with no residue.
Applied on exposed concrete columns with efflorescence. Had to repeat once on the worst patch but the result was worth it.
Leave the product on the affected area for 2–3 minutes to dissolve the efflorescence before scrubbing and rinsing.
It's formulated to be non-corrosive on properly cured masonry, concrete, natural stone and cement-based substrates when used as directed.
For heavy or stubborn deposits, repeat the application after the surface has dried.
Yes, it's suitable for heritage and restored structures as well as new construction, in addition to brick, stone, and concrete surfaces.
Innovative construction chemicals
engineered for lasting protection
trusted by builders, valued by homes.
Subscribe to our Newsletter to be updated. We promise not to spam.
© 2026 WeeShield. All rights reserved.